facebooktwitterlinkedin
maestro
mastercard
visa
pay-pal
cod
*Free Delivery for above AED 500 Purchase
find
Educational Kits Dubai
DCA55 Semiconductor Analyser
Manufacture : PEAK ELECTRONIC UK
Part Number : DCA55
(Semiconductor Analyser,Instruments )
Unit Min (Nos) Unit Max (Nos) Price/1 Unit
1 3 AED 360.00
4 10 AED 340.00
11 25 AED 320.00
26 50 AED 300.00
AED 360.00 (1 - 3 Nos)

USD 97.20 (1 - 3 Nos)
  • Payment Methods
Product Description
         http://www.peakelec.co.uk/acatalog/jz_dca55.html

The Peak Atlas DCA

A fresh approach to component analysis has resulted in the fantastic PeakAtlas DCA, an intelligent, slim and invaluable tool. A world of detailed component data has never been so accessible.

Just connect your component any way round and press the test button. TheAtlas DCA will then present you with detailed component information in concise, easy to read, scrollable pages. The displayed information will include: the component type, special component features, component pinout, and measured parameters (such as gain, leakage current, gate threshold voltages, volt drops etc...). No more searching through data books and catalogues in order to identify components and pinouts, the Atlas DCA does it all.
Analysis Portfolio
It doesn\\\\\\\\\\\\\\\'t matter how you connect the test clips to the component, the Atlas DCA can analyse a vast number of different component types including bipolar transistors, enhancement mode MOSFETs, depletion mode MOSFETs, Junction FETs (only gate pin identified), low power thyristors and triacs (less than 5mA trigger and hold), diodes, multiple diode networks, LEDs, bi-colour and tri-colour LEDs. It will even identify special component features such as diode protection and shunt resistors in transistors. For two-leaded components such as diodes and LEDs, any pair of test clips can be applied to the component any way round, the Atlas DCA sorts it all out for you.
\"\\"\\\\"\\\\\\\\"Atlas\\\\"\\"\"\"\\"\\\\"\\\\\\\\"Atlas\\\\"\\"\"\"\\"\\\\"\\\\\\\\"Atlas\\\\"\\"\"
Simplicity
There is no on/off switch, power is automatically turned on at the start of an analysis and then automatically turned off if inactive for more than 30 seconds. Each page of displayed information is presented in manageable amounts, with each page being displayed when you want it. If you want to concentrate on the \\\\\\\\\\\\\\\"pinout\\\\\\\\\\\\\\\" page then just select that page, you don\\\\\\\\\\\\\\\'t have to see information that you don\\\\\\\\\\\\\\\'t need.

The Atlas DCA Package 
The Peak Atlas DCA is supplied complete with a long life battery, universal test probes and a comprehensive illustrated user guide. Furthermore, free and unlimited technical support and advice is available to all users by telephone, fax, email or our web site.
ParametersMinimumTypicalMaximumNotes
 Peak test current into S/C-5.5mA 5.5mA1
 Peak test voltage across O/C-5.1V 5.1V1
 Measurable transistor gain range (HFE)4 65,0002
 Transistor gain accuracy (for HFE<1000)-3%-5 HFE +3%+5 HFE2,9
 Transistor VCEO2.0V 3.0V2
 Transistor VBE accuracy-2%-20mV +2%+20mV9
 VBE threshold for Darlington identification 0.9V 3
 VBE threshold for Darlington identification (shunted) 0.8V 4
 Acceptable transistor VBE  1.8V 
 Base-emitter shunt resistance threshold 60k  
 Transistor collector-emitter test current2.45mA2.50mA2.55mA 
 Acceptable transistor collector leakage 1.0mA 6
 MOSFET gate threshold range0.1V 5.0V5
 MOSFET gate threshold accuracy-2%-20mV +2%-20mV5
 MOSFET drain-source test current2.45mA2.50mA2.55mA 
 MOSFET minimum acceptable gate resistance 8k  
 Thyristor/Triac gate test current 4.5mA 7
 Thyristor/Triac load test current 5mA  
 Diode test current  5mA 
 Diode forward voltage accuracy-2%-2mV +2%+2mV 
 VF threshold for LED 1.50V  
 Short circuit detection threshold 10 ohms  
 Battery typeGP23A 12V Alkaline
 Battery voltage range7.50V12V  
 Battery voltage warning threshold 8.25V  
 Inactivity power-down period 30 secs  
 Dimensions (excluding test leads)103 x 70 x 20 mm
 Operating temperature range0°C 50°C8
 

 

Example screenshots for a typical transistor:

\"\\"\\\\"\\\\\\\\"Example\\\\"\\"\"

  1. Between any pair of test clips.
  2. Collector current of 2.50mA.
  3. Resistance across reverse biased base-emitter > 60k.
  4. Resistance across reverse biased base-emitter < 60k.
  5. Drain-source current of 2.50mA.
  6. Collector-Emitter voltage of 5V.
  7. Thyristor quadrant 1, Triac quadrants I and III.
  8. Subject to acceptable LCD visibility.
  9. BJT with no shunt resistors.

In store :4 Nos
4 pcs in stock for next working day delivery

SIMILAR PRODUCTS HAVING
DCA75 Semiconductor Analyser
1- 3 (Nos) AED 760
Linkedin
Twitter
Facebook
Google Plus