| 0.25W | ||
| ?5% | ||
| 200V | ||
| 400V | ||
| -55…125?C | ||
| 100ppm/?C |
Previous product
Back to products
IN5363B DIODE
5.00 AED – 10.00 AED
Next product
CRCW0603200 200RJ 100MW SMD RESISTOR
2.00 AED – 3.00 AED
SMD 1206 470R
2.00 AED – 3.00 AED
Resistor: thick film; SMD; 1206; 470?; 0.25W; ?5%; -55?125?C
Description
Additional information
| pack | pack of 10, pack of 5 |
|---|
Related products
STF3NK80Z TO220
N-channel 800V - 3.8 Ohm - 2.5A TO-220/FP/DPAK/IPAK Zener-protected Supermesh Power MOSFET
14D151K VARISTOR
Varistors 150volts 14mm
SN75175N
The SN65175 and SN75175 are monolithic quadruple differential line receivers with 3-state outputs. They are designed to meet the requirements of ANSI Standards EIA/TIA-422-B, RS-423-B, and RS-485, and several ITU recommendations. These standards are for balanced multipoint bus transmission at rates up to 10megabits per second. Each of the two pairs of receivers has a common active-high enable.
The receivers feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ?200 mV over a common-mode input voltage range of ?12 V. The SN65175 and SN75175 are designed for optimum performance when used with the SN75172 or SN75174 quadruple differential line drivers.
The SN65175 is characterized for operation from -40?C to 85?C. The SN75175 is characterized for operation from 0?C to 70?C.
SMD DIODE 562
General Purpose Inductor, 47uH, 2%, 1 Element, Air-Core, SMD, 1915, SMD
Reviews
There are no reviews yet.